Practical Advice - Bosch GKT 18V-52 GC Professional Originalbetriebsanleitung

26 | English
Material
Plastics
Acrylic glass
Plaster- and cement-bonded
fibreboards
A)
±25 %
Status indications
Battery charge indicator Meaning/cause
(user interface) (37)
Green (2 to 5 bars) Battery charged
Yellow (1 bar) Battery almost empty
Red (1 bar) Battery empty
Temperature indicator (43) Meaning/cause
Yellow Critical temperature has been reached (mo-
tor, electronics, battery)
Red Power tool is overheated and will switch off
Smartphone indicator(41) Meaning/cause
and Power tool status indic-
ator (42)
Yellow Service reminder
Power tool status indic- Meaning/cause
ator (42)
Green Status OK
Yellow Critical temperature has been reached or bat-
tery is almost empty
Red Power tool is overheated or battery is empty
Flashing red Restart protection is triggered
Connectivity functions
In conjunction with the GCY 42 Bluetooth® Low Energy Mod-
ule, the following connectivity functions are available for the
power tool:
– Registration and personalisation
– Status check, output of warning messages
– General information and settings
– Management
– Setting the speed levels
Read the corresponding operating instructions for informa-
tion about the Bluetooth® Low Energy Module GCY 42.
1 609 92A 4XT | (11.02.2020)
Application Application tool
Sawing Expert for High-Pressure Laminate
T42
Expert for Aluminium T48
Sawing Expert for High-Pressure Laminate
T42
Expert for Aluminium T48
Sawing Expert for Fibre Cement T4
The smartphone indicator (41) lights up when the power
tool sends information (e. g. temperature warning) to a mo-
bile device via Bluetooth® wireless technology.

Practical advice

u
u
Protect saw blades against shock and impact.
Speed preselec-
tion level
2–5
4–5
1–4
Solution
–
Replace or charge battery soon
Replace or charge battery
Solution
Run the power tool at no load and allow it to
cool down
Leave the power tool to cool down
Solution
For more information see Bosch Toolbox App
or Service
Solution
–
Run the power tool at no load and allow it to
cool down, or replace or charge the battery
soon
Allow the power tool to cool down, or replace
or charge the battery
Turn the power tool off and on again; if neces-
sary, remove the battery and reinsert it.
With the Bluetooth® Low Energy Module GCY 42, the
power tool is equipped with a radio interface. Local
operating restrictions, e.g. in aircraft or hospitals,
must be observed.
In areas where the Bluetooth® wireless technology is
not allowed to be used, the Bluetooth® Low Energy
Module GCY 42 and the button cell must be removed.
–1
[min ]
3350–4950
4400–4950
2800–4400
Bosch Power Tools