Playing Records - Wörlein soundmaster EliteLine PL880 Bedienungsanleitung

ADJUST THE WEIGHT OF THE STYLUS
1. Slide in the counter weight completely into the rear of the tone arm until it reach the end ,
turn it clockwise until it click with pit inside.
2. Twist the counter weight clockwise & backward until it reach the white line as figure 2
3. Twist the counter marking until it reach " 1 " position
4. Twist the counter weight anti-clockwise & inward until it reach the appropriate working
pressure.
Remark : The working pressure of the provided stylus is from the range 4 – 6 grams.
According to the cartridge manufacturer. All stylus has it own working pressure and please
refer to the specification respectively.

PLAYING RECORDS

This system includes a full-size, 2-speed, belt-drive turntable. You can play 33 and 45 rpm
records.
1. Press the "MODE" button to enter the "PHONO" mode.
2. Make sure that you have removed the stylus cover from the stylus and have released the
tone arm lock that secured the tone arm to the tone arm rest.
3. Set the turntable speed selector to the appropriate speed 33 or 45rpm. If you are playing 45
rpm 'singles', place the 45 rpm adapter on the centre spindle.
4. Place your record on the centre spindle.
5. Raise the cue lever to lift the tone arm off its rest. Move the tone arm to the edge of the
record. The turntable starts automatically. Use the cue lever to gently lower the tone arm
onto the record.
6. Press the "VOL-/+" button to the desired level.
7. When the tone arm reaches the end of the record it automatically returns to the tone arm
rest and the record player stops.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the turntable
without securing the tone arm clamp could result in damage to the tone arm.
8
PL880 / English Instruction Manual