MSI K8N Neo3-Serie Kurzanleitung Seite 14

MS-7135 ATX Mainboard
Installing AMD Athlon64 CPU Cooler Set
and a cooling fan attached on the top to prevent overheating. If you do not
have the heat sink and cooling fan, contact your dealer to purchase and install
them before turning on the computer.
1. Detach the shield off the
2. Turn over the mainboard, and install
E-8
Downloaded from www.Manualslib.com
W hen you are installing the CPU, make sure the CPU has a heat sink
MSI Reminds You...
Mainboard photos shown in this section are for demonstration of the
cooler installation for Socket 754 CPUs only. The appearance of
your mainboard may vary depending on the model you purchase.
backplate's paster.
the backplate to the proper position.
manuals search engine
3. Turn over the mainboard again, and
place the mainboard on the flat
surface. Locate the two screw
holes of the mainboard.
4. Align the retention mechanism and
the backplate.
Fix the retention mechanism and
the backplate with two screws.
retention mechanism