Ferm BJM1009 Bersetzung Der Originalbetriebsanleitung Seite 5

Precision Biscuit Jointer 900W
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers. All
products delivered to you by Ferm are manufactured
according to the highest standards of performance
and safety. As part of our philosophy we also
provide an excellent customer service, backed by
our comprehensive Warranty. We hope you will
enjoy using this product for many years to come.
The numbers in the text refer to the diagrams
on page 2-4.
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Introduction
The Biscuit Jointer is suitable for cutting grooves
for biscuit dowel joints in solid wood, plywood,
chipboard, fibre board, plexiglass and artificial
marble.
Contents
1. Technical specifications
2. Safety instructions
3. Adjusting the machine
4. Mounting accessories
5. Operation
6. Maintenance
1. TECHNICAL SPECIFICATIONS
Contents of packing
1 Biscuit Jointer
1 Saw blade
1 Wrench
1 Dust extraction adapter
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Downloaded from www.Manualslib.com manuals search engine
Check the machine, loose parts and accessories
for transport damage.
Features
Fig.A
1. ON/OFF switch
2. Rear hand position
3. Motor housing
4. Front handle
5. Spindle lock button
6. Angle adjustment knob
7. Fence
8. Height adjustment knob
9. Cutting depth adjustment knob
10. Depth fine adjustment screw
11. Base plate
12. Dust extraction adapter
13. Dust bag
14. Spanner
15. Centerline
16. Biscuit dowel
17. Flange nut
18. Saw blade
19. Flange
20. Bottom plate
21. Angle scale and arrow
22. Height scale and arrow
Machinedata
Voltage
Frequency
Power input
No-load speed
Disc diameter
Blade bore diameter
Max. cutting depth
Fence adjustment
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
230-240 V
50 Hz
900 W
11000/min
Ø 100 mm
Ø 22 mm
14 mm
0 - 90°
3.2 kg
91 dB(A) K=3dB
105 dB(A) K=3dB
1.85+1.5 m/s2
5