Fein ALG80 Originalbetriebsanleitung Seite 11

Symbol, character
A)
B)
Unit of measure-
Character ment, international
U
V
1
U
V
2
P
W
1
f
Hz
I
mA
max
C
Ah
t
min
T
°C/ °F
m
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
Operating Instructions.
Connect the battery charger to the socket outlet with-
out a battery inserted. The green LED indicator lights
up and signals operational readiness.
Insert the battery.
The monitoring of the charge procedure is signalled by
a flashing green light.
The end of the charge procedure is indicated by contin-
uous green lighting.
The rapid charging starts automatically as soon as the
battery temperature is within the charge-temperature
range of 5 °C to 45 °C.
Meaning of the LED indications
LED indicator
Continuous green light
Explanation
Warning! Electrical voltage
USB charging port
®
Bluetooth functionality
The mobile devices must be compatible with Bluetooth
and support the Generic Access Profile (GAP).
The operating range can vary greatly depending on external conditions, including the
receiver being used. Within enclosed spaces and through metal barriers (e.g. walls,
®
shelves) the Bluetooth
Unit of measure-
ment, national
V
V
W
Hz
mA
Ah
min
°C/ °F
m
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
2
min, m/s
Meaning
The battery charger is ready for operation; mains voltage is given.
operating range can be significantly reduced.
Explanation
Rated supply voltage
Rated output direct voltage
(rated battery voltage)
Power input
Frequency
Maximum rated direct output current
(max. rated charging current)
Capacity
Charge duration
Temperature
Max. Bluetooth
Basic and derived units of measurement from
the international system of units SI.
2
When lithium-ion batteries are fully charged, the bat-
tery charger switches off automatically.
Repeated inserting of a charged battery leads to over-
charging and affects the service life of the battery.
If the battery becomes discharged within a short time
despite being charged correctly, it has reached the end
of its service life.
The installed fan starts and stops depending on the
charger's internal temperature.
On the ALG80BC, alternate flashing of the green and
blue LED indicates connection readiness of the Blue-
®
tooth module. If the blue LED lights up continuously,
an active Bluetooth
®
low energy devices (version 4.1)
®
operating range
®
connection exists.
en
11