Electrolux Ultrapower EUP82MG Gebrauchsanweisung Seite 2

For models EUP82xxx
1 2 3 4
www.electrolux.com
ENGLISH
than 30 seconds (constant or interrupted) it will deactivate the brush
GB roll and turn off the nozzle front lights. The vacuum cleaner can still be
Thank you for choosing an Electrolux Ultrapower® vacuum cleaner.
used, even when the BRUSHROLLCLEAN® function is deactivated. To re-
In order to ensure the best results, always use original Electrolux
activate the BRUSHROLLCLEAN® function, place Ultrapower® on charge
FR accessories and spare parts. They have been designed especially for
and charge for 15 minutes.
your vacuum cleaner. This product is designed with the environment
Please note that the BRUSHROLLCLEAN® function might not be able to
in mind. All plastic parts are marked for recycling purposes.
remove thicker threads or wires that are caught in the brush roll.
AR
DESCRIPTION OF ULTRAPOWER®
EMPTYING OF THE DUST CONTAINER
A. ON/OFF button K. Cable protector grill
BG
9 Remove the dust container by pressing the button.
B. Power regulation button L. Hatch cover for brush roll
C. Locking screw M. Brush roll 10 Take out the filters from the dust container by pressing the release but-
CZ D. Charging station, wall unit (* N. BRUSHROLLCLEAN® pedal tons. Empty the contents into a dustbin. Never wash the dust container
E. Charging station, floor unit (* O. Nozzle front lights or filters in a dishwasher.
F. Charging adapter P. Charging indicator
DA G. Fine filter (inner filter) Q. Cliff hanger
IMPORTANT FILTER CLEANING!
H. Pre filter (outer filter) R. Wall holder *)
11 The filters must be cleaned at regular intervals to ensure a high clean-
I. Release button, dust container S. Charging connector*)
ing performance. Take out the filters by pressing the release buttons.
DE J. Dust container
Separate the inner filter from the outer filter.
Rinse the filter parts carefully under lukewarm water without using any
(* Not available on models *) Only on models EUP82xx. 12
EE detergents. (Never use the dishwasher or washing machine.) Shake to
EUP82xxx
remove excess water and leave to dry minimum 12h before putting
them back into the cleaner.
BEFORE STARTING
ES
Check that the package includes all parts described in this instruction
manual and read this manual carefully. Pay special attention to the CLEANING THE HOSE AND NOZZLE WHEELS
safety precautions chapter. Save these instructions.
FI 13 Loosen the hose behind the nozzle from its upper connection. Remove
any object or debris that can be blocking the airflow in the hose or in
1 Assemble the handle.
the air channel to the dust cup, and put the hose back.
GR For model EUP82xx, use the wall holder *):
14 If the wheels need to be cleaned or get jammed, remove them carefully
A) Make sure that Ultrapower® is on a stable and horizontal surface
2 by using a flat screwdriver.
away from heat sources, direct sunlight or wet places. Attach the wall
HR
holder to the wall 104 cm above the floor with a suitable screw and wall
REMOVING AND CLEANING THE BRUSH ROLL
plug. Make sure to use a correct wall plug for the wall.
B) Attach the handle to the wall holder. 15 If the brushroll gets blocked Ultrapower® will stop. Open the cable
HU
C) Connect the charging cable to the back side of the vacuum cleaner. protector grill and the brush roll hatch cover and remove the brush roll.
Use a pair of scissors to remove threads etc. Reassemble the brush roll,
For all other models: 16
making sure it can spin freely.
IT 3 Assemble the charging stand.
4 A) Connect the charging cable to the charge stand.
B) There is a hollow space in the bottom of the charging station where REMOVING THE BATTERIES FOR RECYCLING
LT
unused cable can be wound. Warning; Battery removal must only be done by an Electrolux
C) Position the charging station on a stable and horizontal surface away service center or official collection point!
from heat sources, direct sunlight or wet places. 17 Only remove batteries if the product is to be scrapped. Improper
LV
handling of the batteries may be hazardous. Batteries should always
5 Insert the adaptor into the mains and charge Ultrapower®. The charging
indicator will be lit when Ultrapower® is on charge. be completely discharged before removal. Take your product to an
Electrolux service center or official collection point for recycling. They
NL
can remove and recycle the battery and electric parts in a safe and pro-
CHARGING ULTRAPOWER®
fessional way. Follow your country's rules for collection of rechargeable
6 When fully charged, the charging indicator will blink slowly. The num-
NO batteries and electrical products.
bers of LED lamps will indicate the level of charge. Full charging time is
around 5 hours. For better battery performance, charge Ultrapower® for
PL 24 hours before first use and always keep it on charge when not used.
Enjoy a great cleaning experience with Ultrapower®!
VACUUMING WITH ULTRAPOWER®
PT
Before vacuuming, check that the nozzle wheels and the brush roll are
clean from sharp objects in order to avoid scratching sensitive floors
and to ensure full cleaning performance.
RO
Start and stop Ultrapower® by pushing the ON/OFF button. Ultrapow-
7
er® has 3 power settings which is regulated with the power regulation
RU
button.
Ultrapower® will start on the "High power mode".
For more silent cleaning and longest run time, press the power regula-
SK
tion button to activate the "Long runtime mode".
Press the power regulation button one more time to activate the "Nor-
mal cleaning mode".
SL
BRUSHROLLCLEAN® FUNCTION
SR
Use the BRUSHROLLCLEAN® function to keep the brush roll clean and
free from hair and fibres. For best results use the BRUSHROLLCLEAN®
function when Ultrapower® is fully charged.
SV
8 Place Ultrapower® on a hard and flat surface. Do not use the BRUSH-
ROLLCLEAN® function on carpets.
Press the BRUSHROLLCLEAN® pedal with your foot while the cleaner is
TR
on. Hold for 5 seconds until hairs and fibres are removed. There will be
a cutting noise during this process, this is normal. If hairs remain on the
brush roll, repeat the process.
UA
The BRUSHROLLCLEAN® function is equipped with an overheating Electrolux reserves the right to change products, information and
protection. If the BRUSHROLLCLEAN® function has been used for more specifications without notice.
2 www.electrolux.com 4
5 6 7 8
9 10
11 12
13 14 15 16
17
www.electrolux.com 3