Reed UPC616A Betriebsanleitung Seite 7

Cut & bevel PvC set-up, Fig. 7.
installation of rEEd bevel cutter and blade for PvC
97561 UPCLA Long Arbor
1. Start with base motor unit
3. Tighten PVC Bevel Cutter onto Long Arbor
97511 UPCBPVC
PVC Bevel Cutter
2. Tighten Long Arbor onto motor
unit
4. Add blade for PVC
5. Slide on 97066 Flanged Washer and then
tighten 97543 Flexloc Nut
97561
UPCLA
Long Arbor
97511
UPCBPVC
PVC
Bevel Cutter
6. Add Blade Guard Assembly
7