Inhaltsverzeichnis
Werbung
Preparation for use
EN
|
Total weight (with batteries, without wall plate)
Weight with wall plate
Conformity
Manufacturer
5.
Preparation for use
5.1.
Installation and assembly
The dispenser can be used free-standing or mounted on a wall.
5.1.1.
Free-standing installation
If you are using it free-standing, make sure that:
> the surface is level and stable
> there are no moving objects nearby
> if the dispenser falls over, any leaking product does not come into contact with other objects.
5.1.2.
W all mounting
> The dispenser must be attached to a straight wall with at least 3 screws using the supplied bracket.
> Use the supplied or other suitable mounting material for wall mounting.
> Make sure the wall is suitable before installation!
i
> When choosing the location, consider the ease of access for fi lling!
> Do not install the device in narrow entrance areas and passages!
> Microwaves or fl uorescent tubes can cause electromagnetic interference. If this occurs, remove the
cause of interference. The device should then work properly again.
18
0.930 kg
1.067 kg
RoHS compliant
Machinery directive 2006 / 42 / EG
EMC- directive 2004/108/EG
EN 55014-1:2006
EN 55014-2:2001
EN 60335-1/A11:2014
Ophardt Ireland, Tubbercurry Road, Ballymote, Co. Sligo, Ireland
Werbung
Inhaltsverzeichnis
