Herunterladen Diese Seite drucken

VOLTCRAFT PLC-1000S Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATING INSTRUCTIONS
POWER ADAPTOR
ITEM NO.: 44 88 77
PLC-1000S POWER ADAPTOR CHARGER
ITEM NO.: 44 88 91
PLC-2400S POWER ADAPTOR CHARGER
ITEM NO.: 44 88 94
PLC-4800USB USB POWER ADAPTOR
ITEM NO.: 44 89 03
PLC-2000USB USB POWER ADAPTOR
INTENDED USE
Use this product to charge and operate Apple devices with an 8-pin Lightning connector. The
additional USB output can be used to charge and operate USB devices (applies only to item
no. 44 88 94 + 44 89 03). Power supply via a normal household power outlet. The product
features overload and short circuit protection mechanisms. Use the product in dry indoor
areas only.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If
you use the product for purposes other than those described above, the product may be
damaged. In addition, improper use can cause hazards such as short circuiting, fire, electric
shock etc. Read the instructions carefully and keep them. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
DELIVERY CONTENT
• Power adaptor
• Operating instructions
SAFETY INSTRUCTIONS
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Always turn the connected appliance off before connecting or disconnecting it.
• Unplug the device when it is not in use.
• The product gets hot during use. Ensure sufficient ventilation and never cover the
product during use.
• Do not short-circuit the outputs.
• Make sure that the cable is not squeezed, bent or damaged on sharp corners.
• Never connect or disconnect power adaptors if your hands are wet.
• For safety reasons, disconnect the power adaptor from the mains socket during
storms.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
If you are not sure about the correct connection or use, or if questions arise which are not
covered by these operating instructions, please do not hesitate to contact our technical
support or another qualified specialist.
Voltcraft®, Lindenweg 15, D-92242 Hirschau, Tel. +49 96 04 / 40 87 80
OPERATION
Always turn off all devices before connecting them to the appropriate
VERSION 07/13
connector on the power adaptor. Make sure the connection is correct. If the
product is not connected properly, it could overheat or cause an electric
shock or fire.
Make sure that your device is suited for use with the power adaptor's rating.
Observe the information in chapter "Technical data".
1. Turn off your Apple device and connect it to the power adaptor's Lighting plug.
2. Turn off your USB device and connect it to the USB power adaptor's USB output (applies
only to item no. 44 88 94 + 44 89 03).
3. Connect the power adaptor to a common household power outlet. The power indicator on
the power adaptor lights up to indicate that the product is ready for use (does not apply to
item no. 44 88 77).
4. The connected appliance(s) will then be charged. If you want to use the connected
appliance(s) you may now switch it/them on.
5. Turn off all connected devices before unplugging them.
6. After use, unplug the device.
CLEANING
Unplug the product before cleaning. Clean the product with a dry, fiber-free cloth.
DISPOSAL
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
TECHNICAL DATA
Input voltage ............................................100 – 240 V/AC, 50/60 Hz
Output voltage .........................................5 V/DC
Operating conditions ................................0 to +40 ºC, 20 – 85 % RH (non-condensing)
Storage conditions ...................................-20 to +60 ºC, 10 – 90 % RH (non-condensing)
Cable length ............................................1 m
Output current/power ...............................1 A, 5 W max. (item no. 44 88 77)
.................................................................2.4 A, 12 W max. (item no. 44 88 91)
.................................................................2 x 2.4 A, 24 W max. (item no. 44 88 94)
.................................................................2 x 1 A, 10 W max. (item no. 44 89 03)
Dimensions (W x H x D) ..........................38 x 17 x 67 mm (item no. 44 88 77)
.................................................................48 x 35 x 85 mm (item no. 44 88 91 + 44 89 03)
.................................................................61 x 35 x 98 mm (item no. 44 88 94)
Weight .....................................................40 g (item no. 44 88 77)
.................................................................74 g (item no. 44 88 91)
.................................................................144 g (item no. 44 88 94)
.................................................................76 g (item no. 44 89 03)
Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 96 04 / 40 87 80
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Voltcraft®

Werbung

loading

Diese Anleitung auch für:

Plc-2400sPlc-4800usbPlc-2000usb44 88 7744 88 9144 88 94 ... Alle anzeigen