PNI IP60 2MP 4G PTZ SOLAR Benutzerhandbuch Seite 4

Installing the camera and making its connections
• Open the cover on the back of the camera.
• Install a 4G SIM card as shown below (steps 1, 2, 3)
Warning: The SIM card with 4G mobile data must not have the PIN code activated.
Insert the SIM card into a mobile phone, deactivate the security PIN code and
check if the mobile data is available by accessing any internet page.
• Install the micro SD card (max. 128 GB), as shown on step 4
• Connect the power adapter of the battery into the camera
• Connect the solar panel to the battery
• Turn on the battery power using the red round switch:
User manual 4