Camry Premium CR 1182 Bedienungsanweisung Seite 5

PRESET
There are 20 presets available for DAB and 20 presets for FM.
1. Set the desired radio station frequency as explained previously;
2. Press and hold the [PRESET] button (13);
3. Choose the number of preset using the [TUNE -/+] buttons (8/9);
4. Confirm with the [ENTER] button (12).
RECALL A PRESET STATION
1. Press the [PRESET] button (13);
2. Select the desired preset using the [TUNE -/+] buttons (8/9);
3. Confirm with the [ENTER] button (14).
INFO
When the radio station is playing, press the [INFO] button (8) repeatedly to cycle
through the information broadcasted by the radio.
CD-MP3 OPERATION
1. Select "CD" mode by turning the [MODE] knob (4);
2. Press [OPEN/CLOSE] (3) to open the [CD DOOR] (2) and place a CD with the label up in the CD compartment.
3. Close the [CD DOOR] (2). Focus search is performed and playback will start
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (12);
2. Press [PROGRAM] (7), the display (1) will show the number of the track on the left side and the number of program on the right side.
3. Select desired track by using [SKIP -/+] buttons (8/9);
4. Press [PROGRAM] (7) to confirm desired track into the program memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (10) to play the disc in the order you have programmed.
Note: Press [STOP] (12) twice to terminate programmed play.
BLUETOOTH OPERATION
1. Select "BT"mode by by turning the [MODE] knob (4);
2. Connect your Bluetooth portable device to the ID Bluetooth tagged as "CR 1182 ";
3. You can now transfer the music to the CR 1182 .
Note: Music control (play, pause, etc) must be done from your external device.
AUX-IN OPERATION
1. Use one male RCA to male 3.5mm jack cable (not included) to connect any external audio device to the [AUX-IN SOCKET] (18);
2. Select "AUX"mode by turning the [MODE] knob (4).
Note: Music control (play, pause, etc) must be done from your external device.
USB OPERATION
1. Select "USB" mode by turning the [MODE] knob (4);
2. Plug an USB stick into the [USB PORT] (5);
3. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the USB socket. this is not a maul
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
The USB port is not designed for charging smart phones or other devices.
DIRECT USB ENCODING
Remark:
Recording speed is 1:1.
No song title will be recorded during encoding mode.
To avoid damage to USB memory, remove it only when the radio is turned off.
ENCODE FROM DAB+, BLUETOOTH AND AUX:
1. Plug the USB stick into the [USB PORT] (5);
2. Perform normal playback of the source you want to encode & record;
3. Press and hold the [RECORD] button (11) to start encoding. The display will show "REC";
4. Once the record is finished, press the [STOP] button (12) to stop recording.
ENCODE FROM CD:
1. Plug the USB stick into the [USB PORT] (5);
2. Perform normal playback of the CD you want to encode & record;
3. After focus search is completed, press and hold the [RECORD] button (11);
4. Press repeatedly the [SKIP -/+] button (8/9) to select the desired encoding option:
REC-ONE: Select to record only the current track;
5