Measuring Functions - Bosch GLM Professional 50-27 CG Originalbetriebsanleitung

44 | English
button or the (3) [–] button to select the required reference level. Every time the meas-
uring tool is switched on, the last selected reference level is preset.
"Settings" menu (see figure C)
Press the (7) [ ] button to access the "Settings" menu (j).
Use the (6) [+] button or the (3) [–] button to select the required setting and confirm
this by pressing the measuring button (5) [ ] or the (2) [Func] button.
Use the (6) [+] button or the (3) [–] button to select the required setting and confirm
this by pressing the measuring button (5) [ ] or the (2) [Func] button.
To exit the "Settings" menu, press the on/off/back button (8) [ ].
The following settings are available:
– Switching sound on/off
– Switching vibration on/off
ment; one long vibration indicates a measurement error.
– Display illumination
– Battery saver mode
tion are deactivated and the display brightness is reduced. This extends the battery
runtime.
– Changing the unit of measurement ft/m
– Setting the language
– PRO360 : Initial activation is required. Data can only be transferred using a suit-
able app or computer program. After changing the battery, the measuring tool must
be switched on once to restart PRO360. PRO360 can be deactivated again at any
time. You can find additional information about PRO360 at www.pro360.com.
– Device information
– Factory Reset

Measuring functions

Help function (see figure D)
To select a measuring function, press the button (2) [Func]. Select the desired measur-
ing function with the button (6) [+] or the button (3) [–].
To start the help function, press the (7) [ ] button. The help function shows the de-
tailed procedure for the selected measuring function.
Measuring length
Select the length measurement mode
1 609 92A 4ZJ | (14.10.2020)
: Two short vibrations indicate a successful measure-
: When battery saver mode is switched on, sound and vibra-
.
Bosch Power Tools