Operation - Klarstein Iceblokk 100 Handbuch

OPERATION

Before first use
Before using the unit for the first time, wipe the interior and all internal parts with
lukewarm water and a little neutral detergent. Dry the parts carefully afterwards.
Important: Do not use harsh detergents or abrasive cleaners, as they will damage the
surfaces.
Control panel
1
Temperature Indicator Light
2 Super frost indicator light
3
Operation indicator light
When you plug in the connector, all lights light up briefly. After that, the unit runs with the
last settings made.
Setting the temperature
Press the SET key to enter the temperature setting mode. The temperature display bar
moves a little to the right each time the key is pressed. The temperature can be set from
MIN to MAX. The MAX setting is the coldest. The temperature is automatically adopted
5 seconds after the last key press.
Note: Normally, it is recommended to set the temperature to NORMAL or colder for
optimal food preservation. The longest storage time at this setting is no longer than 1
month. A lower setting may shorten the storage time.
4
SET button
5 POWER button
EN
25