Panasonic TY-42TM6P Bedienungsanleitung Seite 7

Slot Nos. of the PDP unit that are compatible with terminal board attachments.
Notes:
(1) The PC input terminals are DDC1/2B-compatible. If the computer being connected is not DDC1/2B-compatible,
(2) Some PC models cannot be connected to the set.
(3) The computer shown in the illustration is for example purposes only.
(4) Additional equipment and cables shown are not supplied with this set.
(5) Component Input is possible with the pin 1, 2, 3 of the D-sub 15P Connector.
(6) For details of compatibility with input signals, please refer to Plasma Display operating instructions.
(7) D-sub 15P connector does not support the DPMS function.
Signal Names for D-sub 15P Connector
Downloaded from www.Manualslib.com
37inche Slot1 ,Slot2
42inche 50inche Slot1 ,Slot2 ,Slot3
Connection
computer
Conversion adapter
(if necessary)
you will need to make setting changes to the computer at the time of connection.
*There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.
Pin No.
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Pin Layout for PC Input
Terminal
manuals search engine
AUDIO
COMPONENT/RGB IN
SLOT1 SLOT2
Stereo plug
Connect a cable which matches
the audio output terminal on the
computer.
Audio
RGB
PC cable
Signal Name Pin No.
1 R (P /C ) 6
R R
2 G (Y) 7
3 B (P /C ) 8
B B
4 GND (Ground) 9 NC (not connected)
5 GND (Ground) 10
SLOT
1 2 3
SLOT3 SLOT3
D-sub 15p
Signal Name Pin No. Signal Name
GND (Ground) 11 GND (Ground)
GND (Ground) 12 SDA
GND (Ground) 13 HD/SYNC
14 VD
GND (Ground) 15 SCL
PC IN
7