Positioning The Shredder And Starting It Up - HP Pro Shredder 15CC Bedienungsanleitung

1 Reverse running
2 On/Off button
3 Forward running

Positioning the Shredder and Starting It Up

The shredder only operates when the waste bin supplied is fitted and closed. Do not position the
shredder near any sources of heat and maintain a distance of at least 10 cm to walls. This ensures
the shredder is sufficiently cooled.
1 Set the shredder down on a stable, level, horizontal surface and in the vicinity of an easily
accessible power socket.
2 Slide the waste bin in the device. The waste bin latches audibly in place. If the waste bin is not
fitted in the device properly, the shredder cannot be switched on.
3 Connect the power cable to the device.
4 Connect the power plug to a power socket.
5 Switch the device on by pressing the On/Off button.
Î The status indicator lights up blue.
Î You have put the shredder into operation.
1
overload-red flashing
2
overload-red on
stand by-blue on
5 4
4 Overheating
5 Overloading
- 13 -
EN
3