Connections; Connecting To Your Tv & Vcr; Basic Connection With A Coaxial Cable; Basic Connection With A Scart Cable - Strong Digital TV SRT 5155 Bedienungsanleitung

5150 UM-B5 12/22/04
PART 1 • English

3.0 Connections

3.1 Connecting to your TV & VCR

3.1.1 Basic connection with a coaxial cable

Connect the antenna cable of your terrestrial antenna with the ANT input.
Connect the To RF OUT connector at the back of the receiver to the ANT IN connector
on your TV set.

3.1.2 Basic connection with a Scart cable

Connect the antenna cable of your terrestrial antenna with the ANT input.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV set.

3.1.3 Advanced connection

Connect the antenna cable of your terrestrial antenna with the ANT input.
Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV set.
Connect the VCR scart connector at the back of the receiver to the scart-in connector on your VCR set.
Connect a coaxial cable to the RF OUT connector at the back of the receiver. Connect the other
end of this coaxial cable to the ANT IN connector of your VCR.
Connect the TV OUT connector of your VCR to the ANT IN connector of your TV set with a
coaxial cable.
Note: If you have a digital audio amplifier with a digital audio input, use the S/PDIF output.
3.1.4 Connection with Audio/Video RCA Cable
(Please see inside cover Figure 7)
On the back of your receiver you will find the RCA connectors (Audio Left & Right – Red& white,
Video – Yellow)
Install an audio/video cable between the RCA connectors of the receiver and those of your TV
set or amplifier.
5:27 PM Page 7
(Please see inside cover Figure 6)
(Please see inside cover Figure 4)
(Please see inside cover Figure 5)
7