Cleaning And Maintenance - Blaupunkt UVirus Killer Bedienungsanleitung

BAP-IT-H3148-U31W
UV and Negative-ion Functions
Press the UV button to turn on the UV lamp.
Press and hold for 5 seconds to turn the
ionizer function on/off. (The ionizer function
is automatically enabled when the machine
is powered on)
Reset
Press and hold for at least 5 seconds to reset
the machine. (This function is only available
when there is a filter replacement
notification).
Air quality indicator
Press UV light button to enable/disable the
air quality colour indicator?
CLEANING AND
MAINTENANCE
Be sure to pull out the plug before cleaning.
Do not immerse the product into water or any other
liquid. Do not use corrosive or flammable
substances (e.g. bleach or alcohol) to clean any part
of the product.
Only the pre-filter can be cleaned with water, other
filters can't.
Cleaning the Air Purifier
Clean the outer casing regularly to prevent dust
accumulation.
1. Use a soft dry cloth to wipe off the dust.
2. Use a soft dry cloth to clean the inlets and
outlets.
Cleaning the Air Quality Sensor
Clean the air quality sensor every two months to
make sure the air purifier runs at its best. If the air
purifier is used in a dusty environment, please clean
it more often.
Attention
When indoor humidity is very high, condensation
may form on the air quality sensor. So even if the air
quality is good, the air quality indicator may indicate
poor air quality. If so, clean the air quality indicator
or use manual fan speed settings.
www.blaupunkt.com
16