Cleaning And Maintenance - Blaupunkt Lavender 1224 Bedienungsanleitung

CLEANING AND MAINTENANCE

CLEANING or REPLACING HEPA FILTER (See Figure 2)
1. Turn off and unplug the unit. Press the lock & release button and remove the
rear cover from the unit.
2. Take out the used filter and discard it properly.
3. Attach the pre-filter to the HEPA filter using Velcro and insert the new HEPA
filter.
4. Install the rear cover back onto the unit and securely latch in place.
NOTE: Do not use water or any other household cleaners to clean the HEPA filter.
Due to varying environmental conditions, the filter may need to be replaced
earlier or later than indicated by the
turns from white to dark grey or black, it means you need to change the filter. If
the HEPA filter is still white, it does NOT need to be replaced, even if the
HEPA Indicator on the LED is blinking. Please contact the seller to purchase a new
HEPA filter.
www.blaupunkt.com
Figure 2
REPLACE HEPA
7
Indicator. If the HEPA filter
LV 1224
REPLACE