Optional Settings - Panasonic CS-E10KD3EA Bedienungsanleitung

OFF / ON
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
• For normal operation, OFF indicator shown on remote
control display when the unit is turn off.
TO SET TEMPERATURE
TEMP
• Selection range: 16°C ~ 30°C.
MODE
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects operation mode according to temperature
setting, outdoor and room temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up.
COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
• During soft dry operation, the indoor fan operates at a
low fan speed.
• The louvers movement might not align with the remote
control display.
FAN SPEED TO SELECT FAN SPEED
(5 OPTIONS)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
QUIET/
QUIET
POWERFUL
QUIET - TO ENJOY QUIET ENVIRONMENT
• This operation reduces airfl ow noise.
POWERFUL - TO ACHIEVE TEMPERATURE QUICKLY
• Single Split System: This operation stops automatically
after 20 minutes.
• Multi Split System: Press the button again or turn OFF
the unit to stop this operation.
QUIET/
POWERFUL
• can be activated in all modes and can be
cancelled by pressing the respective button again.
Notes:
• For Hide-Away models, AIR SWING
• Airfl ow direction can not be adjusted.
POWERFUL NORMAL
buttons are not in use.
DAILY TIMER SETTING DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
MODE
• Press once to change the display from Clock to
Timer or vice-versa.
• Press for more than 4 seconds to change the
display from Daily Timer to Weekly Timer or vice-
versa.
2
UP
OFF/ON
DOWN
Select ON or Set the time.
OFF timer.
• To cancel ON or OFF timer, press
• When ON timer is set, the unit may start early before
the actual set time in order to achieve the desired
temperature on time.
• Timer operation is based on the clock set in the remote
control and repeats daily once set.
• The timer closest to the current time will be activated
fi rst.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting by pressing

OPTIONAL SETTINGS

OPTIONAL SETTINGS
Press and hold for approximately 10
DOWN
seconds to show temperature setting in
°C or °F.
Press to restore the remote control's
RC
default setting.
AC
Not used in normal operations.
Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
1
3 4
SET
Confi rm.
CANCEL
.
SET
.
7