What To Do If - Zanussi ZEE6940 Benutzerinformation

Removing the dirt:
1. Use the fine scouring powder or a scouring pad to
remove the dirt.
2. Clean the appliance with a damp cloth and some de-
tergent.
3. Heat the hotplate to a low temperature and leave to
dry.

What to do if...

Problem
The appliance does not operate.
The cooking zone does not heat up.
The effectiveness of the hob is not
satisfactory.
www.zanussi.com
4.
Important! For stainless steel edges of the hob use cleaner
for stainless steel.
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that the appliance is plugged in and the electrical supply is
switched on.
• Make sure that you turn the correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow time after time, speak to an authorised electrician.
• Make sure that the hob is clean and dry.
• Make sure that the cookware is the correct size for the cooking zone.
• Make sure that the cookware has a flat bottom.
• Make sure that the heat setting is correct for this type of cooking.
To maintain the hotplates, rub in a little sewing ma-
chine oil now and again and then polish off with ab-
sorbent paper.
The stainless steel edge of the plate can be slightly
discoloured as a result of the thermal load.
Possible cause and remedy
15