Using The Brakes - babyplus GEMELLI Montage- Und Bedienungsanleitung

EN

Using the brakes

1. The stroller is equipped with a safety brake. In order to lock, press the brake with your foot down.
The brake is located besides the right rear wheel of the stroller.
2. To release the brake, push the brake with your foot up.
NOTE! The brake is not applied to slow down the stroller. Use it only when the stroller is not moving.
NOTE! Never leave a child in the stroller without the brake activated.
Assembly the canopy
Fitting and removing the bumper bar
1. To fix the bumper bar, put the predetermined holes at the ends of the bumper bar on the device on the frame next to the
seat unit (picture 10).
2. To remove the bumper bar, push the button on both sides up, which is positioned on the underside of the bar and pull the
bumper bar out (picture 11).
There is no need to remove the bumper bar before folding the stroller.
NOTE! Using the safety bar does not replace the 5 point harness.
To assembly the canopy, attach the canopy frame on the strollers frame
below the handles (picture 9).
Set the canopy in the desired position.