Haws 30-ISM180 Bedienungsanleitung Seite 45

3) Put the removable bucket into the appliance. Make sure it fits tightly. When the loading bucket is
placed, the two ears of the bucket should face the two notches on the top cover. Otherwise there will
be problems such as poor performance and slippage.
4) If you want to choose the ice cream mode, please install the mixing blade into the bucket. If you want to
choose the yoghurt mode, please remove the mixing blade. Put the transparent lid onto the appliance and
lock it in an anti-clockwise direction.
Note: there is a small arrow on the transparent lid. Make sure it points at the left side of the appliance after
the lid is locked.
Arrow
OPERATION
Always let the appliance rest for at least 2 hours after moving it from one location to another.
1. Plug the appliance into a suitable electrical outlet. A beep sound will be heard. The power button on the
touch screen is flashing. This is the power-on state. (Fig.1)
2. Press and hold the power button for more than 1 second to enter the mode selection interface. Touch the
mode icon, the upper and lower brackets will appear on the icon to indicate that the current mode is
selected. As shown below in Fig.2 (Ice cream mode)
If you want to shut down, press and hold the power button for more than 1 second.
Note: before starting to make the ice cream, you can press the mixing mode button to choose the mixing
function. It helps mix the ingredients more evenly. After the ice cream making process is finished, you can
press the freezing mode button to choose the freezing function. It helps keep freezing the ice cream to
avoid melting.
- 44 -
Lock