Special Instructions - DIMAS TS 100 R Betriebs- Und Wartungsanleitung

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and
reliable
corresponding with the instructions, but it can
present dangers for the user and risks of damage,
consequently regular on site inspection is
necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account
any risks, and correction of any malfunction
detrimental to safety).
• Use of a diamond disc for water lubricated
cutting of marble, stone, granite, brick and
facings (porcelain, glazed tiles, ceramics, etc).
The use of any other disc is forbidden
(abrasive, saw, etc).
• Competent personnel (qualifications, age,
training, education) who have studied the
manual in detail before starting work: any fault
of an electrical or other nature must be
checked by a competent person (electrician,
maintenance foreman, authorized dealer, etc).
• That the warnings and instructions marked on
the machine are followed (adequate personal
protection, correct use, general safety
instructions, etc).
• That no modification, transformation or addition
is detrimental to safety and that it is carried out
without
manufacturer.
• Respect of the maintenance intervals and
periodical checks recommended.
• That only genuine spare parts are used for
repairs.
TYPE TYPE
WEIGHT
MASSE UTILE
MAXI TOOL
Ø MAXI OUTIL
BORE
SPEED
1 Use
• Use : Sawing marble, stone, granite, brick,
cement and all facings (porcelain, glazed tiles,
ceramics, etc).
Downloaded from www.Manualslib.com
This symbol indicates that the machine
is in conformance with the applicable
European directive.
service in operating
prior authorization
Instruction plate
MANUFACTURER
N° SERIE
ANNEE DE
FABRICATION
Kg PUISSANCE
PLAGE DE
mm
TENSION
Ø ALESAGE mm FREQUENCE
T/MN - RPM INT. UTIL.
• Tools : Water lubricated diamond
disc diameter 300 mm - diameter
350xmm (D)- bore 25.4 mm (AL).
(Information from your usual
supplier).
manuals search engine
Carborundum
Do not use the saw for any purpose for which
it is not designed (using a saw blade or
abrasive disk which do not conform to the
instructions for use).
conditions
2 Technical specifications
POWER
2.2 kW ,5(3 HP)
2.9 kW ,5(4 HP)
1.8 kW (2.5 HP)
1.5 kW ,5(2 HP)
• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 54
90°
L
• Depth of cut (E) :
- at 90° : 100 mm - at 45° : 80 mm
• Length of cut (L) :
- 1900/1200 mm - thickness 100 mm
from the
- 1000/1300 mm - thickness 120 mm
• Useful width (w) : unlimited
(Width of support with extension = 600mm)
• Space below disk (S): 120 mm (LH)
• Dimensions (mm) L x W x H
- with legs :
1420/1720 x 840 x 1400 (100R/130R)
- bench :
1420/1720 x 625 x 790 (100R/130R)
• Unladen weight (depending on model) : 106/126
kg (100R/130R)
SERIAL
- legs : 7 kg
FABRICATION
YEAR
• Disc cooling by water spray into the disc casing.
POWER
kW
VOLTAGE • Minimum tank capacity :
V
Hz FREQUENCY
- 55 l/65 l - Lg : 1,30 m
INTENSITY
A
• Water pump :
13 W - flow: 8 to 10 l/min
• Electricity supply :
- 230 V : H07-RNF 3 x 1.5
- 400 V : H07-RNF 5 x 1.5
- 115 V : H07-RNF 3 x 2.5
MODEL
Depending
on model
2.2 / 1,5 KW
Saw blade
disc
VOLTAGE
CURRENT
± 5 %
230 V 50 Hz 14 A
400 V 50 Hz 5 A
230 V 50 Hz 12.5 A
115 V 50 Hz 20 A
45°
l
E
E
(depending on model)
2 - L 3 m
2 - L 3 m
2 - L 3 m
POWER PRESSURE
LEVEL LEVEL
Lwa (dB) Lpa (dB)
EN ISO 3744 EN ISO 4871
80 / 84 79 / 80
PUMP
10 W 230 V
10 W 230 V
10 W 230 V
30 W 115 V
TP
P
:
VIBRATION
LEVEL
G
ENV 25349
0.27 / 0.13
23