Redflow ZBM 1 Kurzanleitung Seite 9

Click Run Mode and Run Mode
LED will turn bright green
Figure 4: ClusterMonitor Battery Service Screen
If the ZBM is to be stored and non-operational for long periods of time, it is recommended
that it be put into Decommission Mode. If the ZBM is at a high state of charge, and will not
be charged or discharged for a short period, it is recommended that it be put into Float
Mode. It is recommended that the ClusterMonitor Manual be consulted on how to perform
these and other actions.
7
Downloaded from www.Manualslib.com manuals search engine