How To Use - Mova Z500 Benutzerhandbuch

How to Use

EN
1. Turn On/Off
Press and hold the button
Once the power indicator turns solid white, the robot is in standby
mode. To turn off the robot, press and hold the button
seconds when the robot is not moving. Turning off the robot will
end the current cleaning task.
2. Start Cleaning
Press the button , and the robot will begin cleaning in an
S-shape pattern. Once all areas are cleaned, the robot will finish
by cleaning along edges and walls, then return to the charging
dock to recharge.
Note:If the battery is too low, the robot will automatically return to the dock
to charge. It will resume unfinished cleaning tasks after charging to the
necessary battery level. (The breakpoint continuous cleaning function must
be enabled on the app in advance.)
10
for 3 seconds to turn on the robot.
for 3
3. Spot Clean Mode
When the robot is paused or in Standby Mode, press and hold the
button for 3 seconds to start Spot Clean Mode. In this mode,
it will clean a square-shaped area of 1.5 ×1.5 meters directly
around the robot. When the spot cleaning is done, the robot will
automatically return to its original location and power off.
1.5 meter
1.5 meter
Note: Activating Spot Clean Mode will end the current cleaning task of the
robot.