Bluetooth Function - X4-TECH Bobby Joey Casey Music Bedienungsanleitung

Figure 5
USB
ON/OFF
DC5V
TF
- ON/OFF
Turn on the device by flipping the switch on the right side to „ON"(Figure 5).
With a short sound, the device indicates being ready to be used. The blue
indicator-LED (Figure 1) on the frontside will start blinking. To turn the
device off, flip the switch to „OFF"(Figure 5), the blue LED turns off.
- Volume
CAUTION! Hearing damage! To avoid hearing damage, do not listen to
music at maximum volume for a long period of time!
Press the (Figure 3 № 6) button shortly to increase the volume. A short
press on the (Figure 3 № 2) button will decrease the volume.
- USB-/SD-operation
» Insert your SD-card/USB-stick into the device.
» Turn on the device as described at „ON/OFF".
» The device will make a sound and starts playing the music.
If the device is already in bluetooth-mode, proceed like this:
» Insert your SD-card/USB-stick into the device.
» Press the (Figure 3 № 3) button.
» The device will make a sound and starts playing the music.
While the music is playing, the LED (Figure 1) on the frontside will blink
slowly. When pausing the music it will glow permanently.
© Note on copy protection. Under applicable law it is forbidden to copy,
transfer, lease or make available any material protected by copyright
without a permit of the right-holder.

- Bluetooth function

» Turn on the device as described at „ON/OFF".
» Activate bluetooth on your smartphone/tablet.
» The LED (Figure 1) on the frontside is blinking to signal ready for connec-
tion.
Figure 6
MIC1 MIC2
17