Abilica XS 3.0 Bedienungsanleitung Seite 10

Step 5: Assemble the Seat Post
Refer to the following figure, loosen the the L-Shaped Handle (23) and slide the Seat Post (2) into
the housing on the Main Frame. Install and tighten the L-Shaped Handle (23) to secure the seat
post.
Step 6: Assemble the Seat
Refer to the following figure, loosen the Pop Pin (67) and then pull down on the Pop Pin (67) to
insert the Seat Slider (3) into the Seat Post (2). Re-tighten the Pop Pin (67). Attach the Seat (22)
to the Seat Slider (3) with the wrench provided.
10