Technical Description - Waeco PerfectView Accessory VS200 Bedienungsanleitung

_VS200.book Seite 20 Montag, 26. Januar 2009 2:35 14

Technical description

5
The VS200 video splitter is used for extending an existing rear view video system. It has
two separate controllable camera inputs, enabling e.g. operation with a rear view and a
side camera or with two separate controllable cameras (for articulated buses, machine
monitoring etc.). The pictures can be displayed individually or side by side (split function).
Cameras which require different voltage can also be connected to one another.
Only one camera input is required on the monitor. The monitor can be automatically
activated via the corresponding control output.
The cameras are activated automatically with a control signal (e.g. reversing light,
indicator) or manually with a switch. In addition, with corresponding cameras a mirror
function can be switched on so that the monitor picture corresponds to a view in the rear
mirror.
The video splitter can be used with almost all WAECO cameras and monitors with PAL
video format using various adapters (accessories).
The video splitter can be connected to a 10 V to 32 V DC voltage supply.
Connections and controls
No. in
fig. 4, page 5
1
2
3
4
5
6
20
Downloaded from www.Manualslib.com
Technical description
Designation
–
CA1
CA2
Monitor Out RCA Monitor output for cinch plug
Monitor Out DIN
Mirror S/W
manuals search engine
Description
Socket for the connection cable
6-pin mini DIN socket
Camera connection 1 (e.g. left camera)
6-pin mini DIN socket
Camera connection 2 (e.g. rear view camera)
yellow = video
white = audio
Monitor output for DIN plug
DIP switch
Select mirror function (if available)
PerfectView