Assembly; Preparing For Use; Inserting / Replacing The Batteries - Silvercrest HG01041A Montage-, Bedienungs- Und Sicherheitshinweise

Assembly

Note: Remove all packaging materials from the product.
Note: You will need a screwdriver and a drill to assemble the doorbell.
Note: Only use the screws and dowels supplied for the assembly of
the product.
Mount the receiver (see Fig. E)
Mount the transmitter (see Fig. F)

Preparing for use

Inserting / replacing the batteries

Insert the batteries to provide power to the product before
preparing it for use.
CAUTION! Use the above-indicated battery types only. Failure to
observe this advice may result in damage to the product.
Receiver:
Remove the battery compartment cover
product.
Remove the used batteries, if present.
Insert 2 batteries (1.5 V
Note: Ensure correct polarity. This is indicated in the battery
compartment
26 GB/IE
(direct current), type AA).
.
9
from the back of the
8