Indicator Light - Peaq MUNET SMART PMN300-B Bedienungsanleitung

Indicator light

•
LED colour
Red
Red
Red
Blue
Blue
Blue
Purple
Purple
Purple
Purple
Blue and
Purple
Blue and
Purple
Blue,
Purple,
Red,
Purple
PMN300_A5_140107 (1.10).indb 25
Downloaded from www.Manualslib.com
During setup and normal operation, the MUNET's indicator light provides
information on connection statuses.
What it means
(Flashing) MUNET is starting up.
(Flashing MUNET is experiencing connection problems.
quickly) Error found.
(Steady on) MUNET is in off mode.
(Flashing) MUNET is connecting to a wireless network.
(Steady on) MUNET is on. MUNET is connected to a wireless network.
(Flashing 3x) MUNET connected to Bluetooth.
(Steady on) MUNET is in sleep mode.
(Flashing MUNET is preparing to update its software.
quickly)
(Flashing 2x) MUNET is reaching its minimum or maximum volume level.
Note: Mute status is not indicated.
(Flashing 3x) Identify device via App
(Alternating MUNET is in WiFi setup mode.
slowly)
(Blue MUNET is under WiFi scanning.
flashing 2x,
then Purple
flashing)
(Alternating MUNET software update in progress.
slowly)
Note: Whilst a software is being updated, do not disconnect
the internet connection of your MUNET for at least 10 minutes.
manuals search engine
ENGLISH
25
8/1/14 4:16 pm