Wisniowski BASIC Montage- Und Bedienungsanleitung Seite 2

EN
tablE of CoNtENts:
1. General information ........................................................................................ 2
2. Terms and definitions acc. to norm ................................................................. 2
3. Definition of symbols ....................................................................................... 2
4. Design description and technical data .......................................................... 2
4.1. Application and designation ................................................................ 2
5. Installation guidelines ..................................................................................... 2
6. Required installation conditions ..................................................................... 2
7. Operating conditions and safety rules .......................................................... 2
8. Installation procedure ..................................................................................... 3
8.1. Installation .............................................................................................. 3
8.2. Preliminary verification .......................................................................... 3
8.3. Assembly accessories ............................................................................ 3
8.4. Segment installation .............................................................................. 3
8.5. Installation UM8/UB8 .......................................................................... 3
8.6. Painting ................................................................................................... 3
9. Environmental protection ................................................................................ 3
10. Disassembly ..................................................................................................... 3
11. Routine maintenance instructions ................................................................... 3
[C000191] 1. GENERal INfoRMatIoN
The fence segment can be installed and adjusted by at least a COMPETENT
person.
[C000192] The Installation instructions is a document intended for Professional
Installers or Competent Persons. It contains necessary information to provide
for safe installation. Fence segments and its parts should be installed according
to the Installation Instructions provided by "WIŚNIOWSKI" Sp. z o.o. S.K.A.
Read the instructions prior to installation works. Read the instructions carefully
and follow its guidelines. Proper functioning depends on its correct installation
to a great extent.
[A000031] Packaging of fencing elements is dedicated for transportation pur-
pose only.
Do not store packaged goods outside buildings, ex-
posed to adverse weather. storage outside buildings,
especially in places exposed to the sun, degrades paint
aesthetic value, because protection film glues (vulcanizes) with
the fence surface.
Products should be kept on a hardened, dust free, dry and flat surface, sta-
ble regardless of the outside conditions, in closed, dry and ventilated rooms,
in a place free of external effects that may affect the condition of residential
and industrial fencing elements, subassemblies and packaging. It is forbidden to
store and warehouse the products in wet rooms and rooms with fumes harmful
for painted and zinc plated coatings.
[C000046] The instructions refer to the installation of several types of fence seg-
ments. Reference drawings may vary in execution details. If it is essential, these
details are shown on separate drawings.
[C000193] The instructions provide all essential information that guarantee safe
installation, operation and proper maintenance. During installation all Health
and Safety regulations pertaining to assembly and cutting operations as well as
power tools, depending on installation methods must be strictly observed. The
norms, regulations and applicable building process documentation should also
be considered. Tampering and removing of any parts is strictly prohibited. It may
result in the elements responsible for safe operation being damaged.
[A000034] Copying this instruction without "WIŚNIOWSKI" Sp. z o.o. S.K.A.
prior written consent and subsequent revision is not allowed. Translating this
instruction, or its parts, without a prior written consent and subsequent revision
of the content by "WIŚNIOWSKI" Sp. z o.o. S.K.A. is not allowed. All rights
related to this instruction are reserved.
"WIŚNIOWSKI" Sp. z o.o. S.K.A. is not responsible for any damage or mal-
functioning due to improper installation or application of the product, so read
this instruction carefully.
[C000194] "WIŚNIOWSKI" Sp. z o.o. S.K.A. bears no responsibility for any
damage or malfunctioning due to using the system elements of other manufactur-
ers or due to application of other manufacturer's elements. This also results in
the loss of warranty.
[A000047] "WIŚNIOWSKI" Sp. z o.o. S.K.A. is not responsible for any dam-
age or injury due to disregarding the installation, maintenance and operating
guidelines herein. The same refers to non-observance of safety rules and law
requirements.
"WIŚNIOWSKI" Sp. z o.o. S.K.A. reserves the right to introduce any reason-
able modifications to its products due to technological, production and commer-
cial reasons. "WIŚNIOWSKI" Sp. z o.o. S.K.A. reserves the right to improve the
product characteristics wherever necessary and without changes to this docu-
ment. Such changes may be introduced any time and without prior notice.
2
Installation and Operating Instructions – Residential fences – segments BASIC
[C000066] 2. tERMs aND DEfINItIoNs aCC. to tHE NoRM
Explanation of warning signs used in the instruction:
attention! – warning sign used to denote the attention.
Information – a sign used to denote important information.
Reference mark – a sign referring to a given paragraph in the
Installation Instruction.
Professional Installer - competent person or organization, offering to third
parties fence segments installation services, including its improvement.
Competent person - an appropriately trained person with qualification re-
sulting from knowledge and practical experience, and provided with necessary
instruction to enable the required installation to be carried out correctly and
safely.
owner - a natural or legal person who has legal title to administer the fence
segments, and takes responsibility for its operation and use.
fence segment - segment filled in with steel hollow sections.
[C000047] 3. DEfINItIoN of sYMbols
S - segment width
So - width between posts - ordering dimension
H - segment height - ordering dimension
L - post height
G - post thickness
N - foundation depth (designed) relevant to the region (area) where installation
takes place, and ground and water conditions, but not less than 800 [mm]
[D000292] 4. DEsIGN DEsCRIPtIoN aND tECHNICal Data
Fence segment is designed as a steel structure. The detailed range of dimensions
and technical data are stated in the price list.
"WIŚNIOWSKI" Sp. z o.o. S.K.A. offers several types of installation:
• on steel posts,
• on brick (concrete) posts.
[D000293] 4.1. aPPlICatIoN aND DEsIGNatIoN
Fence segment is designed to fence premises, land plots, recreation sites,
housing estates, public buildings, and others of the similar designation. Oth-
er applications are treated as inconsistent with the purpose of the product.
"WIŚNIOWSKI" Sp. z o.o. S.K.A. bears no responsibility for any damages
resulted from the application inconsistent with the purpose of the product. The
owner shall bear the risk and the consequences of the inconsistent product
application that result in the loss of the warranty.
[C000196] 5. INstallatIoN GUIDElINEs
Prior to installation and commissioning, the guidelines contained herein should
be read carefully. All installation and operating instructions should be observed
to ensure proper installation and durable failure-free operation. All installation
works should be performed in the described order.
[C000197] 6. REQUIRED INstallatIoN CoNDItIoNs
Fence segment should be applied and used as intended. Selection and applica-
tion of segments in construction industry should be based on technical documen-
tation of the facility developed in compliance with regulations and standards
in force.
[C000198] Fence segment should be used only as intended and after careful
reading of safety conditions and existing risks. The installation and operating in-
structions should also be observed. Fence segment should not be installed in the
places where there is a risk of flooding or local high underground waters. Do
not use it in the areas subject to adverse weather and environmental factors (for
example, salty air). Fence segment should be installed stable; no deviations from
plumb and deformations are permitted.
[B000036] 7. oPERatING CoNDItIoNs aND safEtY RUlEs
[C000199] Keep the instructions in a safe and readily accessible place to use
it quickly when needed. Installation should comply with European Directives
requirements. In non-EU countries, adequate safety level may be ensured by
following the standards listed in the EU Directives. However, the standards and
law valid in a particular county should be observed. Prior to installation and first
operation, read carefully the operating instructions and remarks on the product
installation, operating and maintenance. Product should be used as intended.
Unintended use of the product may pose hazards or lead to damages. The
manufacturer takes no responsibility for any damages resulting from unintended
application of the product.
IIiO/OPo/Segmenty-BASIC/05/2013/ID-93803 Technical description
+