ASROCK Z590M Phantom Gaming 4 Handbuch Seite 10

Rear Panel • 3 x Antenna Mounting Points
I/O • 1 x HDMI Port
• 2 x USB 3.2 Gen2 Ports (10 Gb/s) (ReDriver) (Supports ESD
Protection)
• 4 x USB 3.2 Gen1 Ports (Supports ESD Protection)
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Line in / Front Speaker / Microphone
Storage • 4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
18), NCQ, AHCI and Hot Plug*
* If M2_2 is occupied by a SATA-type M.2 device, SATA3_1 will
be disabled.
• 1 x Hyper M.2 Socket (M2_1), supports M Key type 2280 M.2
PCI Express module up to Gen4x4 (64 Gb/s) (Only
supported with 11
• 1 x Ultra M.2 Socket (M2_2), supports M Key type 2280 M.2
SATA3 6.0 Gb/s module and M.2 PCI Express module up to
Gen3 x4 (32 Gb/s)**
** Supports Intel® Optane
** Supports NVMe SSD as boot disks
* *Supports ASRock U.2 Kit
Connector • 1 x SPI TPM Header
• 1 x Chassis Intrusion and Speaker Header
• 2 x RGB LED Headers
* Support in total up to 12V/3A, 36W LED Strip
• 2 x Addressable LED Headers
* Support in total up to 5V/3A, 15W LED Strip
• 1 x CPU Fan Connector (4-pin)
* The CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan
Speed Control)
* The CPU/Water Pump Fan supports the water cooler fan of
maximum 2A (24W) fan power.
Z590M Phantom Gaming 4
th
Gen Intel® Core™ Processors) **
TM
Technology
7