SHE SHE9KL2001F Bedienungsanleitung Seite 24

3. Installation close to a window using
the window mount
Place the window mount on/in the
window frame, pull it out along the entire
length/height of the window, fasten it with
a bolt or screw and lower / slide the
window onto the mount. Insert the air
hose taper into the opening.
ATTENTION!!
Observe the following
instructions for both
installation methods:
We recommand a SHE Hot-Air Stop for installation on
windows, balcony doors or sliding doors:
They offer the following advantages:

Energy saving  all the warm our is blown out

Easy and quick installation

Durable, water-repellent material

Opening and closing with the HOT AIR STOP
is still possible

Washable
Available at your air conditioner provider.
The air hose must be as short and as little curved as
possible to make sure the air can flow freely.
The air conditioning unit should be set up on level ground to
minimise noise and vibration. Place the device on a level
surface stable enough to support the device.
The device must be placed in the proximity of a properly
grounded outlet. Never block the air inlet and outlet
openings on the device.
The air hose is precisely tailored to this device. Do not
extend it or replace it with another hose. Non-compliance
can lead to damages to the device.
RECOOMMANDATION FROM SHE
Seite 24 von 34