Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
PC lock with number combination
Item no. 1529153
Intended use
The product serves to protect a conventional PC case against theft.
For safety reasons, you must not rebuild and/or modify this product. Using the product for
purposes other than those described above may damage the product. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Combination lock
• Loop
• Brief instructions
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Installation
Write down the number combination and store it in a safe place.
The combination is set to 0000 ex works.
Also refer to the figures in the included English quick start guide.
• Turn the lock shackle 180° and press it into the case until it stops.
• Set your personal number combination.
• Select a suitable screw on the PC case to fasten the bracket with. Loosen the screw.
• Attach the bracket with the previously loosened screw to the PC case.
• Slide the lock in the bracket.
• Connect the cable to a suitable object's anchorage point (e.g. cable gland in the desk). Run
one cable end through the loop on the other end.
• Insert the lock shackle into the loop at the cable end.
• Turn the lock shackle toward the bracket and press it into the case until it stops.
• Turn the number wheels to lock the product.
• To re-open the lock, input your personal number combination and pull the lock shackle out.
Maintenance and cleaning
• Always disconnect the product from the PC case before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
Disposal
Always dispose of the product according to the relevant statutory regulations.
Technical data
Cable Ø ........................................ 4 mm
Cable length ................................. 2 m
Operating conditions ..................... -20 to +60 °C, 20 – 70 % RH
Storage conditions ........................ -20 to +80 °C, 10 – 80 % RH
Dimensions (W x H x D) ............... 20 x 60 x 52 mm
Weight .......................................... 187 g (total)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
Example of use
*1529153_V1_0317_02_IPL_m_en
Werbung
