Pair Bluetooth-Enabled Devices - Grundig DSB 1000 Bedienungsanleitung

BLUETOOTH OPERATION _______________________

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device
to this player, you need to pair your device to this
player.
Note:
• The operational range between this player and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
• Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
Tips:
• Enter "0000" for the password if necessary.
• If no other Bluetooth device pairs with this player
within two minutes, the player will recover its
previous connection.
• The player will also be disconnected when your
device is moved beyond the operational range.
• If you want to reconnect your device to this
player, place it within the operational range.
• If the device is moved beyond the operational
range, when it is brought back, please check if
the device is still connected to the player.
• If the connection is lost, follow the instructions
above to pair your device to the player again.
28 ENGLISH
Listen to Music from Bluetooth Device
• If the connected Bluetooth device supports
Advanced Audio Distribution Profile (A2DP), you
can listen to the music stored on the device
through the player.
• If the device also supports Audio Video Remote
Control Profile (AVRCP), you can use the player's
remote control to play music stored on the
device.
1. Pair your device with the player.
2. Play music via your device (if it supports
A2DP).
3. Use supplied remote control to control play (if
it supports AVRCP).
• To pause/resume play, press the
the remote control.
• To skip to a track, press the
the remote control.
button on
/ buttons on