4
Operation
4.1 Getting started
Make sure the desk has been set up correctly, that the plug
to the control box is inserted firmly and that the cables from
your office equipment and the computer are in the appropria-
te trays. Connect the desk to the mains. Initialise the desk as
described in point 4.3. You can now operate the desk as
normal.
4.1.1 Ergonomics
You should always adjust the desk height so that your
elbows form an angle of at least 90° whether you are sea-
ted or standing. Tip! Make sure your screen position does
not cause glare.
For more information about ergonomics in the workplace,
please visit the following website:
www.vbg.de/bueroarbeit
29