Ultrasonic Cleaning Process - HAVER & BOECKER USC 200 S Bedienungsanleitung

7
CAUTION
CAUTION
ATTENTION
ATTENTION

Ultrasonic cleaning process

Please observe the following instructions before starting the
ultrasonic cleaning process.
It is the user's responsibility to check the cleaning results.
Risk of scalding by hot surfaces and hot liquid!
Ultrasonic energy is physically transformed into heat.
Both unit and liquid heat up during ultrasonic operation. During
continued operation with cover temperatures exceeding 60 °C
can be reached.
Do not reach into the liquid.
Wear protective gloves when handling basket and unit!
Ultrasonic units can produce annoying sounds.
Wear personal ear protection devices when working close to an
ultrasonic unit which is operated without cover.
Sensitive surfaces can be damaged when exposed to
ultrasound over prolonged periods, particularly at low cleaning
frequencies.
Ensure that sensitive surfaces are exposed to ultrasonic
acitivity for a suitable period only.
If in doubt check the cleaning progress regularly and observe
the state of the surface material.
Ultrasonic energy is physically transformed into heat.
Both unit and liquid heat up during ultrasonic operation. During
continued operation with cover temperatures exceeding 60 °C
can be reached.
For the treatment of temperature-sensitive items please take
the heating-up of the liquid into consideration.
Please ensure that the temperature of the liquid remains below
42 °C for the removal of fresh protein or blood particles.
Ultrasonic cleaning process