Description Of Operating Elements - HAVER & BOECKER USC 200 S Bedienungsanleitung

4.7

Description of operating elements

lustration 4.7 View operating elements, turning knob (B) in position „Off"
A LED indicating the cleaning period for both set time and
remaining time.
B Turning knob cleaning time * for switching the unit on and for
setting a cleaning timel. Possible settings: short-time operation:
1; 2; 3; 4; 5; 10; 15; 20; 25; 30 min (with automatic switch-off).
∞
Symbol for continued operation, switch-off by hand.
For reasons of safety the unit automatically switches off after 12
h continued operation.
C Key sieve cleaning mode** for the cleaning of analysis sieves.
LED siev.clean is lighted during operation of this mode.
D Key degas mode** for the optimized degassing of HPLC
solvents and fresh mixed cleaning liquid (Auto-Degas). LED
degas is lighted during operation of this mode.
E Key sample preparation mode** for standard applications,
such as mixing, dissolving, cleaning, etc. LED sample prep. is
lighted during operation of this mode.
F Key ultrasonic operation to start up the ultrasonic activity.
LED ultrasound is lighted during ultrasonic operation.
* Setting the time: turn clockwise
setting back the time: turn anticlockwise
** to start the operating cycle switch the unit on at the key ultrasonic
operation
Product description
A
B
C
D
E
F
Il