Herunterladen Inhalt Inhalt Diese Seite drucken

Placement Of Cleaning Items Or Laboratory Vessels; Degassing Of Liquid - HAVER & BOECKER USC 200 S Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6.2
CAUTION
ATTENTION
Use stainless-steel
basket
Use of glass beakers,
laboratory flasks, etc.
Sieve holder
6.3
Key degas
Auto degas
How to proceed
© Copyright 2017 by HAVER & BOECKER

Placement of cleaning items or laboratory vessels

Caution! The ultrasonic bath has been designed for the
ultrasonic treatment of items and liquids only.
Do not clean living beings or plants!
Do not reach inside the tank during ultrasonic operation!
Cell walls can be damaged by prolonged exposure to ultrasonic
activity.
For placing and taking out the items or vessels always switch
off the unit.
Risk of damage to the unit and/or to the items placed in the
tank!
Do not place the cleaning items directly onto the bottom of the
cleaning tank, as this might lead to damages to the unit.
Place the items into the stainless-steel basket (optional
accessory equipment).
Do not place laboratory flasks and other vessels on the floor of
the ultrasonic tank. Fasten flask or vessel to the holder for glass
flasks (HAVER accessory) or place them into the stainless-steel
basket (HAVER accessory).
Put laboratory sieves into the sieve holder (HAVER accessory).

Degassing of liquid

Newly mixed cleaning liquid is saturated with air which lessens
the cleaning effect of the ultrasonic activity. By sonification of
the liquid over a period of several minutes before the actual
ultrasonic process the tiny air bubbles in the liquid are
eliminated.
Degas any new cleaning liquid for approx. 5 – 10 minutes. For
switch-on and switch-off press the degas key.
The USC 200 S is equipped with an optional auto degas mode.
The operation in degas mode is automatically switched off
when the programmed time (10 min) has run down.
Turn the turning knob (Illustration 4.7.B.) to the right (clockwise)
to switch the unit on.
Press the key ►■ to start the ultrasonic operation.
Press the key degas > 2 sec. to start the auto degas operating
mode.
The LED degas flashes during auto degas operation.
The LED ultrasound is lighted.
Putting unit into operation
10.2017
17

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis