Steam for
heating drinks
Steam for frothing milk
34
Downloaded from
www.Manualslib.com
q Push up sleeve a on nozzle 13.
q Immerse nozzle 13 deep into the liquid which is to be
q Slowly rotate function selector 8 to W.
d
When the function selector is set to W, the nozzle may spurt
slightly.
Escaping steam is very hot.
Do not touch nozzle 13 or direct at people.
q End the process by rotating the function selector 8 back
Note: Clean the nozzle 13 as soon as it has cooled down.
Dried residue is difficult to remove.
q Push down sleeve a on nozzle 13.
q Fill a cup approx.
q Immerse the nozzle 13 approx. 1 cm into the milk.
q Slowly rotate function selector 8 to W.
d
When the function selector is set to W, the nozzle may spurt
slightly.
Escaping steam is very hot.
Do not touch nozzle 13 or direct at people.
q Slowly rotate the cup.
q End the process by rotating the function selector 8 back
Note: When the nozzle 13 has cooled down, clean
immediately
Dried residue is difficult to remove and impairs formation
of the milk froth.
Tip: Use cold semi skimmed milk preferably.
manuals search engine
heated.
The appliance now heats up for approx. 20 seconds.
Then the liquid is heated.
Risk of scalding!
to U.
/
full of milk.
1
3
The appliance now heats up for approx. 20 seconds.
The milk is then frothed.
Risk of scalding!
to U.
see Cleaning/Cleaning the nozzle" chapter.