NETGEAR ProSAFE WN203 Installationsanleitung Seite 4

Configure the LAN and Wireless Access Settings
1. On the computer that is connected to the access point, enter
http://192.168.0.100 in the address field of a browser.
A login window displays.
2. Enter admin for the user name and
password for the password, both in
lowercase letters.
The web management interface of
the access point displays. The menu
lets you navigate to the various
screens.
3. Select Configuration > System > Basic > General from the menu.
a. In the Access Point Name field, enter a unique name or leave the default
name.
b. From the Country/Region drop-down list, select the country where the
access point is installed.
c. Click Apply.
4. Select Configuration > IP > IP Settings from the menu.
By default, the access point has a static IP address of 192.168.0.100 with a
subnet mask of 255.255.255.0, and the DHCP client is disabled.
a. Configure the IP settings for your LAN.
b. Click Apply.
Tip: If you configure the access point as a DHCP client, reserve an
IP address on the DHCP server in your network by binding the
access point's MAC address to the IP address that is issued
by the DHCP server. The next time that you log in to the
access point, you need to use the reserved IP address.
5. Select Configuration > Security > Profile Settings from the menu.
a. Configure one or more security profiles for your wireless network.
b. After configuring each security profile, click Apply.
6. Select Configuration > Wireless > Advanced > Wireless Settings.
a. Next to Antenna, select the External radio button to enable the external
antennas.
b. Click Apply.
Downloaded from www.Manualslib.com manuals search engine
English
3