Addressing The System Interface - Atag II Installationsanleitung

preparing the boiler for operation

Addressing the system interface

1) Find menu 0 "Network" then confirm with the OK button. Select
submenu 03 "Interface system" then confirm with the OK button.
2) Select sub-menu 030 "Zone number" then confirm with the OK
button and assign the configuration code to the system interface:
- 0 no setting zone (Systeme interface not assigned to any zone)
then confirm with the OK button.
3) Return to the main display by repeatedly pressing the
At this stage, the module is operational with the factory parameters.
button
GB
13