Unpacking Inspection - SATA 03005 Bedienungsanleitung

screws. Refit the sheath.
2. Replace the fuse:
First remove the sheath, remove the screws on the battery cover, open
the battery cover, and then remove the rear cover screws and gently move
the rear cover away. Replace the blown fuse with a new fuse of the same
specification and refit the rear cover, battery cover and all screws. Refit the
sheath.
Fuse specification: 10A/690V fast-blow fuse, Ψ 10X38mm, minimum breaking
current 20,000A

Unpacking inspection

- Contents of packing box
- Digital multimeter
- 9V6F22 batteries
- Test probes
- Users manual
- Warranty card
Description
1. Our company reserves the right to make any modification to this manual.
2. Our company does not bear any liability for other losses resulting from the
use of the tester.
3. This manual or any part of it shall not be considered as the basis for
product application for special purposes.
03005 / 03007
-35-
EN DE RU KO PT JA ES