Zipper Maschinen ZI-TKS315 400V Betriebsanleitung Seite 30

 Insert the assembled part in the guide
rail and mount it using two M6x30 half-
round bolts with a square body, two M6
washers and two M6 female screws to
positions A and B. Screw the bolts in
turn until part 24 is tightened. Then
loosen the nuts so that part 24 could
move freely in the guide rail
 Mount part 22 using two M6x30 half-
round bolts with a square body and two
M6 washers. Then apply the same
procedure as specified above. Part 24
will move freely in the guide rail.
 Using the M8x45 hex head bolts and M8
female screws, mount part 26 to the
foot
 The machine is now completely
assembled
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-TKS315_400V
ASSEMBLY
30