Zipper Maschinen ZI-TKS315 400V Betriebsanleitung Seite 27

 Take four M6x16 hex head bolts, four
M6 washers and four M6 nuts and mount
part 4 to the main part 1. The bolts
must not be tightened too much
 Take five M6x16 hex head bolts, five M6
washers and five M6 nuts and mount
part 5, part 7 and part 8 to the main
part 1. The bolts must not be tightened
too much
 Connect parts 2, 3, 4 and 5 with parts 9
and 10. The bolts must not be tightened
too much.
 Parts 8 and 9 must be connected with
part 11. For this, you need four M6x16
hex head bolts, four M6 washers and
four M6 nuts. The bolts must not be
tightened too much.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-TKS315_400V
ASSEMBLY
27