Software Submenu - vimec E10 Handbuch

2.5

SOFTWARE submenu

In the software submenu, it is possible to:
• See and update the software release of the cards;
• Manage the machine configuration data;
To perform the above operations, a SDcard must be introduced in the CPU card containing the updating files.
TO PERFORM A SOFTWARE UPDATING, IT IS NECESSARY TO OPEN A SAFETY DEVICE
otherwise the wording "ERR sic. closed" will be displayed
UPDATING FILES
• QuaE10.hex: CPU updating file;
• PerE10.hex: peripheral cards (cabin and floors) updating file;
SDCARD FORMAT
• Max. capacity <= 2GB. DO NOT USE SDHC SDcard or cards having a capacity > 2GB
• Filesystem = FAT32
SOFTWARE
Esc
Esc
Esc
Esc
Esc
Esc
8202006: E10 Console Manual - EN
Enter
SOFTWARE CPU
1.0
Esc
Down Up
SOFTW.CAB+FLOOR
2.0
Down
Up
READ CONFIG
Down
Up
WRITE CONFIG
Down
Up
DEFAULT CONFIG
Down
Up
READ IBT CONFIG
Down
Up
WRITE IBT CONFIG
Enter
BOOTLOADER 1.2
x2
Enter
SOFTW.CAB+FLOOR
x2
Uploading....../
Enter
READ CONFIG
x2
Oper. executed
Enter
WRITE CONFIG
x2
Oper. executed
Enter
DEFAULT CONFIG
x2
Restore Config...
Enter
READ IBT CONFIG
x2
Oper. executed
Enter
WRITE IBT CONFIG
x2
Restore Config...
7
RIF V1.1
RA RB ZA ZB 00-
Down
SOFTW.CAB+FLOOR
Success