Using Fm; Changing Stations - PURE EVOKE-1 XT Tri-Band Bedienungsanleitung

Using FM

To listen to FM radio stations press the DAB/FM button until the FM label appears at the top right of the screen. If this is the first time you have
switched to FM, you hear the first frequency in the frequency band, otherwise you hear the last station you were listening to.
Downloaded from www.Manualslib.com

Changing stations

Change stations using the Tune knob (or by selecting a numbered preset button).
Turn the Tune knob to search up or down the frequency range and find the station you want. You may see 'Searching... '
briefly on screen while the search for the next station is in progress.
If the station found has RDS data available you see the name of the station at the top of the screen.
You can change the FM tuning method, if preferred, to enable you to manually step up and down the frequency range.
See FM tuning mode on page 7 for more details.
Changing the information displayed
Press the Info button and repeat to change what you see on the bottom of the screen.
Scrolling text The default mode, broadcast by some stations. (RDS stations only)
Frequency & Mode The frequency of the current station and whether you are listening in Stereo or Mono.
Time and date Time and date from the current station. There may be a slight delay before the time appears
when you change station or if your radio has been unplugged from the mains. (Note that the FM
time is only updated regularly when tuned to an RDS station)
manuals search engine
6