Himsa noah LINK Bedienungsanleitung Seite 33

NOAHlink Users Manual
30
Downloaded from www.Manualslib.com
The following table describes how to use the Advanced Settings tab:
SETTING
Set the time
NOAHlink
length before an
power off
idle NOAHlink
time
powers off
Turn hearing
HI power instruments on
status automatically
with NOAHlink
Set NOAHlink to
Power on
power on
when
automatically
leaving
when removed
cradle
from its cradle
Change the
Driver
driver
Scan ports to
COM Port
locate
Settings
NOAHlink
manuals search engine
OPTION
 Select the length of idle time
before NOAHlink powers off
OR:
 Select Off for NOAHlink to
remain on indefinitely
 Select On to turn on hearing
instruments automatically when
NOAHlink powers on
 Select Off for hearing
instruments to be turned on
through the fitting module
 Select On for a previously
powered on NOAHlink to
power on automatically when
removed from its cradle
 Click Change. A File Menu
appears.
 Select the driver after browsing
for its location
 Click OK
NOTE: Only select new values if
 Use the pull-down menus at
COM Port low and COM Port
high to select new values.
PROCEDURE
your system CANNOT
locate NOAHlink