Himsa noah LINK Bedienungsanleitung Seite 18

12. Ensure that NOAHlink is still turned on. (If NOAHlink remains
13. The NOAHlink Pairing Wizard window appears. Press Search to
14. The program searches for your NOAHlink. When a list of devices
15. A window appears stating The NOAHlink device was
16. Refer to Chapter 8 in order to configure your NOAHlink unit.
17. NOTE: If you have more than one NOAHlink unit, it is
18. Refer to the NOAHlink site at
Downloaded from www.Manualslib.com
idle for more than 30 minutes, it will automatically turn off.)
search for NOAHlink devices.
appears, select the NOAHlink you wish to use. Click Pair
NOAHlink.
successfully paired. Click OK.
recommended that you attach one of the name labels that are
included in your NOAHlink package to the back of your
NOAHlink and write a suitable name on this label. Refer to
Section 8.1.1 for details on naming NOAHlink via your PC.

a list of fitting modules that support NOAHlink. These
modules can use NOAHlink for programming hearing
instruments.

support and troubleshooting
manuals search engine
NOAHlink Users Manual
www.himsa.com for:
15