Changing Gobo's; Cleaning And Maintenance; Technical Specifications - Velleman HQ Power HQLE10032 Bedienungsanleitung

4.3 Changing Gobo's

Carefully pull the gobo out of the
projector and replace with the
desired gobo.

5. Cleaning and Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use
harsh chemicals, cleaning solvents or strong detergents.

6. Technical Specifications

power supply............................... 14 VDC, 3.6 W (adaptor incl.)
IP rating ....................................................................... IP44
projection distance .................................................... 10-15 m
LED source ................................................... 4 x 1 W (RGBW)
dimensions ..................................................... 400 x 104 mm
weight ......................................................................... 750 g
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 25/08/2017
HQLE10032
5 ©Velleman nv